Viking Access Systems

Elika 460

The NEW Elika 460 Cellular Telephone Entry

  • Cellular voice and programming (Elika cell plan required)
  • Bluetooth access control available (not included)
  • Web based remote programming
  • 4 line LCD display
  • Up to 200,000 users (up to 3 phone numbers per user)
  • 2 relay outputs
  • 26 bit wiegand interface
  • Programmable timers with holiday schedule
  • Battery backup (optional)
  • Still shot camera included
  • 2 year manufacturer warranty

Elika Bluetooth Module

Bluetooth module for Elika 460 telephone entry systems

  • allows use of cellphone as access device through Bluetooth


Replacement 10 Amp Motor Breaker Switch

Replacement 10amp motor breaker switch

Replacement 12V 7AH Battery

Replacement 12V 7AH battery

  • 2 required per operator

Replacement 20 Amp Motor Breaker Switch

Replacement 20amp motor breaker switch for H10 and H10NX operators

Replacement Carrier Screw

Replacement carrier screw

  • For 1st generation (light gray) G5 actuator

Replacement Carrier Screw for G5NX Actuator

Replacement carrier screw for G5NX actuator

Replacement Circuit Board

Replacement 1st generation (Gator) circuit board

  • For use with the following models
    • K2
    • L3
    • R6
    • F1
    • T21
    • G5 (Single System)
    • X9 (Single System)

Replacement Circuit Board for H10

Replacement 1st generation (Gator) circuit board for H10 operators

Replacement Clamp with Handle

Replacement clamp with handle for all swing gate operators except G5 and X9

Replacement Clutch Key

Replacement clutch key for all swing gate operators except G5 and X9

Replacement Crank Arm Assembly

Replacement crank arm assembly for all swing gate operators except G5 and X9

Replacement Drive Sprocket

Replacement chain drive sprocket

  • For use with the following models
    • K2
    • K2NX
    • L3
    • L3NX
    • H10
    • H10NX

Replacement Dual Circuit Board

Replacement 1st generation (Gator) circuit board for dual G5 and X9 systems

Replacement EMI Power Board

Replacement EMI power board for 1st generation (Gator) circuit board

  • For use with the ALL Viking 1st generation operators

Replacement G5 Motor and Lead Screw

Replacement G5 motor and lead screw

  • For 1st generation (light gray) G5 actuator

Replacement G5NX Lead Screw with Coupler

Replacement lead screw with coupler for G5NX

Replacement Gearbox for F1

Replacement gearbox for F1 and F1NX operators

Replacement Gearbox for K2NX

Replacement gearbox for K2NX

Replacement Gearbox for L3NX and H10NX

Replacement gearbox for L3NX and H10NX operators

Replacement Gearbox for R6

Replacement gearbox for R6 and R6NX operators

Replacement Gearbox for T21

Replacement gearbox for T21 and T21NX operators

Replacement Idler Pulley

Replacement idler pulley

  • Bushing and hardware sold separately
  • For use with the following models
    • K2
    • K2NX
    • L3
    • L3NX
    • H10
    • H10NX

Replacement Idler Pulley Bushing

Replacement idler pulley bushing and hardware

  • Idler wheel sold separately
  • For use with the following models
    • K2
    • K2NX
    • L3
    • L3NX
    • H10
    • H10NX

Replacement Limit Cams

Replacement limit cams for all swing gate operators except G5 and X9

Replacement Limit Cams

Replacement limit cams

  • Sold as a set
  • For use with the following models
    • K2
    • L3
    • H10

Replacement Limit Disc with Cams

Replacement limit disc with cams for all swing gate operators except G5 and X9

  • Sold as a set

Replacement Limit Switch

Replacement limit switches for all operators except G5 and X9

Replacement Limit Switch

Replacement Limit Switch for G5 and G5NX operators

  • Sold as a set

Replacement Limit Switch Gearbox

Replacement limit switch gearbox

  • For use with the following models
    • K2
    • L3
    • H10

Replacement Limit Switch Holder

Replacement Limit Switch holder for G5 and G5NX operators

  • Sold as a set

Replacement Motor Assembly for H10

Replacement motor and gearbox assembly for H10

Replacement Motor Assembly for K2

Replacement motor and gearbox assembly for K2

Replacement Motor Assembly for L3

Replacement motor and gearbox assembly for L3

Replacement Motor Brushes

Replacement motor brushes for new style Viking motors

  • For use with the following models
    • K2
    • K2NX
    • L3
    • L3NX
    • R6
    • R6NX
    • F1
    • F1NX

Replacement Motor Brushes

Replacement motor brushes for new style Viking motors

  • For use with the following models
    • H10
    • H10NX
    • T21
    • T21NX

Replacement Motor Connector Plug

Replacement motor connector plug for wiring G5NX to control board

Replacement Motor for F1

Replacement motor for F1 and F1NX operators

Replacement Motor for G5NX Actuator

Replacement motor for G5NX actuator

Replacement Motor for H10NX

Replacement motor for H10NX

Replacement Motor for K2NX

Replacement motor for K2NX

Replacement Motor for L3NX

Replacement motor for L3NX

Replacement Motor for R6

Replacement motor for R6 and R6NX operators

***This motor is NOT for original R6 direct drive units***

Replacement Motor for T21

Replacement motor for T21 and T21NX operators

Replacement Output Arm

Replacement solid output arm for all swing gate operators except G5 and X9

Replacement Output Shaft Cover

Replacement output shaft cover for 1st generation operators

  • Thumb screw sold separately

Replacement Output Shaft Cover

Replacement output shaft cover for NX generation operators

  • Thumb screw sold separately

Replacement Output Shaft Cover Thumb Screw

Replacement thumb screw for output shaft cover

Replacement Output Shaft for F1 & T21

Replacement Output Shaft

  • For use with the following models
    • F1
    • F1NX
    • T21
    • T21NX

Replacement Output Shaft for R6

Replacement output shaft for R6 and R6NX operators

Replacement Power Supply Panel

Replacement power supply panel

  • Panel includes EMI board
  • For use with the following models
    • F1NX
    • T21NX
    • L3NX
    • H10NX

Replacement Power Supply Panel for R6NX

Replacement power supply panel for R6NX operators

  • Panel includes EMI board

Replacement Power Supply Panel K2NX

Replacement power supply panel for K2NX

  • Panel includes EMI board

Replacement Secondary Arm Board

Replacement secondary actuator control module for dual G5NX applications

  • For Pre-UL VFLEX boards (Black Sticker)

Replacement Secondary Arm Board (U16)

Replacement secondary actuator control module for dual G5NX applications

  • For UL16 VFLEX boards (Green Sticker)

Replacement Secondary Arm Board (U18)

Replacement secondary actuator control module for dual G5NX applications

  • For UL18 VFLEX boards (Orange Sticker)

Replacement VFLEX Circuit Board (Pre 2016)

Replacement VFLEX circuit board for NX generation operators built before 2016

  • For use with all NX models except H10NX

Replacement VFLEX Circuit Board (UL2016)

Replacement VFLEX circuit board for NX generation operators built after January 2016

  • For use with all NX models except H10NX

Replacement VFLEX Circuit Board (UL2018)

Replacement VFLEX circuit board for NX generation operators built after August 2018

  • For use with all NX models except H10NX

Replacement VFLEX Circuit Board for H10NX (Pre 2016)

Replacement VFLEX circuit board for H10NX operators built before 2016

Replacement VFLEX Circuit Board for H10NX (UL2016)

Replacement VFLEX circuit board for H10NX operators built after January 2016

Replacement VFLEX Circuit Board for H10NX (UL2018)

Replacement VFLEX circuit board for H10NX operators built after August 2018

Replacment G5NX Actuator

Replacement complete G5NX actuator

***Note: Some 1st generation boards may need to be upgraded to work properly with this actuator***

Viking Access Thru-Beam Photocell

  • Viking Access infared photocell
  • UL325 Approved for 10K applications
  • 12-24 VAC/DC
  • Up to 100' range

Viking E4

  • Dual Actuators with Control Box
  • 115 – 230 VAC / Single Phase
  • 1/2 HP DC motor Battery backup included
  • For gates up to 16’ or 850lbs.
  • ***Operator accepts 10KΩ entrapment devices***
  • 3 year residential manufacturer warranty

Viking E4

  • Single Actuator with Control Box
  • 115 – 230 VAC / Single Phase
  • 1/2 HP DC motor
  • Battery backup included
  • For gates up to 16’ or 850lbs.
  • ***Operator accepts 10KΩ entrapment devices***
  • 3 year residential manufacturer warranty

Viking F1NX

  • 115 – 230 VAC / Single Phase
  • 1/2 HP DC motor (Continuous duty)
  • Battery backup included
  • For gates up to 12’ gate / 1000lbs. or 15’ gate / 600lbs.
  • ***Operator accepts 10KΩ entrapment devices***
  • 5 year manufacturer warranty

Viking G5 Swing Gate Post Mount Adapter

Viking Swing Gate Post Mount Adapter
  • Bolt on bracket for G5 actuators
  • Compatible with 4" round, 4" square and 6" square posts

Viking G5NX

  • Dual Actuators with Control Box
  • 115 – 230 VAC / Single Phase
  • 1/2 HP DC motor (Continuous Duty)
  • Battery backup included
  • For gates up to 18’ or 2000lbs.
  • ***Operator accepts 10KΩ entrapment devices***
  • 3 year manufacturer warranty

Viking G5NX

  • Single Actuator with Control Box
  • 115 – 230 VAC / Single Phase
  • 1/2 HP DC motor (Continuous Duty)
  • Battery backup included
  • For gates up to 18’ or 2000lbs.
  • ***Operator accepts 10KΩ entrapment devices***
  • 3 year manufacturer warranty

Viking G5NXSLR

  • Dual Actuators with Control Box
  • 12VDC Solar
  • Requires solar panel and battery - sold separately
  • 1/2 HP DC Motor
  • Up to 16' gate / 1,000lbs
  • ***Operator accepts 10KΩ entrapment devices***
  • 3 year manufacturer warranty

Viking G5NXSLR

  • Single Actuator with Control Box
  • 12VDC Solar
  • Requires solar panel and battery - sold separately
  • 1/2 HP DC Motor
  • Up to 16' gate / 1,000lbs
  • ***Operator accepts 10KΩ entrapment devices***
  • 3 year manufacturer warranty

Viking H10SPS

  • 115 – 230 VAC / Single Phase
  • 1 HP DC motor (Continuous Duty)
  • Battery backup included
  • Up to 75’ Overall Cantilever gate / 2200lbs.
  • Includes 25' of #40 chain (nickel plated)
  • ***Operator accepts 10KΩ entrapment safety devices***
  • 5 year manufacturer warranty

Viking K2SPS

  • 115 – 230 VAC / Single Phase
  • 1/2 HP DC motor (Continuous duty)
  • Battery backup included
  • Up to 30’ Overall Cantilever gate / 700lbs.
  • Includes 25' of #40 chain (nickel plated)
  • ***Operator accepts 10KΩ entrapment safety devices***
  • 5 year manufacturer warranty

Viking K2SPSSLR

  • 12VDC Solar
  • Requires solar panel and battery (sold separately)
  • 1/2 HP DC Motor
  • Up to 30' overall gate / 700lbs
  • Includes 25' of #40 chain (nickel plated)
  • ***Operator accepts 10KΩ entrapment safety devices***
  • 5 year manufacturer warranty

Viking Konnect

  • Provides wireless communication between a primary and secondary operator
  • Up to 100' wireless range

Viking L3SPS

  • 115 – 230 VAC / Single Phase
  • 1/2 HP DC motor (Continuous Duty)
  • Battery backup included
  • Up to 60’ Overall Cantilever gate / 1600lbs.
  • Includes 25' of #40 chain (nickel plated)
  • ***Operator accepts 10KΩ entrapment safety devices***
  • 5 year manufacturer warranty

Viking Monitor

Viking Monitor

Viking Q7

  • 115 – 230 VAC / Single Phase
  • 2 HP DC motor (Continuous duty)
  • Battery backup included
  • Up to 55’ Overall Cantilever gate / 7,000lbs.
  • Includes 30' of #50 chain (nickel plated)
  • ***Operator accepts 10KΩ entrapment safety devices***
  • 5 year manufacturer warranty

Viking R6NX

  • 115 – 230 VAC / Single Phase
  • 1/2 HP DC motor (Continuous Duty)
  • Battery backup included
  • For gates up to 14’ or 700lbs.
  • ***Operator accepts 10KΩ entrapment devices***
  • 5 year residential warranty

Viking R6NXSLR

  • 12VDC Solar
  • Requires solar panel and battery - sold separately
  • 1/2 HP DC Motor
  • For gates up to 14' or 700lbs
  • ***Operator accepts 10KΩ entrapment devices***
  • 5 year manufacturer warranty

Viking Swing Gate Post Mount Adapter

Viking Swing Gate Post Mount Adapter
  • Adapter works on R6, F1 and T21 swing gate operators
  • Requires two (2) 3" O.D. posts, not included

Viking T21NX

  • 115 - 230 VAC / Single Phase
  • 1 HP DC motor (Continuous Duty)
  • Battery backup included
  • For gates up to 12’ gate / 2,000lbs or 20' gate / 1,200lbs
  • ***Operator accepts 10KΩ entrapment devices***
  • 5 year manufacturer warranty

Viking X-390 Dual Kit

  • Dual Column Mount Operators with Control Box
  • 115 – 230 VAC – Single Phase
  • 1/2 HP DC motor (Continuous Duty)
  • Battery backup included
  • Includes XP30-10K Infared Photocell
  • Includes 433mhz receiver and two (2) transmitters
  • For gates up to 14’ or 600lbs.
  • ***Operator accepts 10KΩ entrapment devices***
  • 3 year manufacturer warranty

Viking X-390 Single Kit

  • Single Column Mount Operator with Control Box
  • 115 – 230 VAC – Single Phase
  • 1/2 HP DC motor (Continuous Duty)
  • Battery backup included
  • Includes XP30-10K Infared Photocell
  • Includes 433mhz receiver and two (2) transmitters
  • For gates up to 14’ or 600lbs.
  • ***Operator accepts 10KΩ entrapment devices***
  • 3 year manufacturer warranty